1
Listeroid Engines / Re: Lister SR valve stem to guide clearance??
« on: April 23, 2020, 11:22:10 AM »
Hi, does anyone know the tolerances? workshop manual doesnt mention them. Thanks, Hes
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Listeroid Engines / Lister SR valve stem to guide clearance??
« on: April 18, 2020, 12:21:39 PM »
Hi.
Does anyone know the valve stem to guide clearances for lister sr1?
Thanks Hes.
Does anyone know the valve stem to guide clearances for lister sr1?
Thanks Hes.
4
Listeroid Engines / SR1 workshop manual
« on: April 09, 2020, 02:01:43 PM »
Hi. Im needing a workshop manual for an SR1. Does anybody have a digital copy/pdf/link?
Would be much appreciated,
Thanks, Hes
Would be much appreciated,
Thanks, Hes
5
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 11:06:43 PM »Hi Hes
It will take your wallet south!
Its to rebuild the dumper? Post a pic of the bore though.
Cheers
VP
Sorry, yes for a dumper rebuild. Im restoring the whole thing, should be a pic attached...
6
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 10:57:42 PM »
I dont mind spending on it as long as its right. I wouldnt want to take it apart again.
Il get a pic of bore tomorrow if i remember.
thanks , Hes
Il get a pic of bore tomorrow if i remember.
thanks , Hes
7
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 07:43:08 PM »
Had a good clean of everything today. This engine was stood full of water for a long time and was seized tight.
Cylinder is pitted heavily, piston is scored, valves are like a sieve, push rods are bent, big end shells worn through, mains worn through.
All parts il have to renew, probably a few more yet aswell.
Cylinder is pitted heavily, piston is scored, valves are like a sieve, push rods are bent, big end shells worn through, mains worn through.
All parts il have to renew, probably a few more yet aswell.
8
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 03:34:33 PM »
Can anyone shed some light on part numbers for this engine? My parts I want to order all start with 201 but im finding when I search for them online they start with 570.
I.E.
My piston: 201-50851/OS 020/19 (assume thats 020 oversize) Internet piston: 570-10940/020
My Big end bearings: 201-50971 On the internet : 570-12170
Any help would be appreciated. Thanks
I.E.
My piston: 201-50851/OS 020/19 (assume thats 020 oversize) Internet piston: 570-10940/020
My Big end bearings: 201-50971 On the internet : 570-12170
Any help would be appreciated. Thanks
9
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 02:45:29 PM »
Still the wrong way! but they are the correct way on my PC
10
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 02:44:17 PM »
These should be right... (can anyone can delete the previous pictures on this thread?)
12
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 02:29:40 PM »Hi Hes
Very good. Now try again and tilt the pics and reduce wide px. After that hands on job!
Stay safe
VP
Getting there, Thanks for the tip!
15
Listeroid Engines / Re: Lister SR1A overhaul
« on: April 08, 2020, 12:41:39 AM »
attachment attempt #1 unsuccessful 
try again tomorrow
Hes
try again tomorrow Hes
Pages: [1] 2