1
Everything else / Re: JP Lister Fuel Drain
« on: May 21, 2022, 02:47:58 AM »
Hi,looks like some real bush-craft mate.As long as it don't leak it will do,but not STD factory issue !
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Everything else / Re: What engine?
« on: May 21, 2022, 02:42:23 AM »
I am pretty sure that you are correct, it is very likely a CEM model presently driving a winch set up on an old slip way.Yes she would be a real monster to move about. Discovered on a ticki-tour in New Zealand a short wile ago,going back next summer and maybe will hear it running!Thanks for your time!
3
Everything else / What engine?
« on: May 17, 2022, 05:12:22 AM »
Can anybody identify this engine hidden in a old shed in New Zealand.
5
Engines / Re: Lister model L
« on: March 18, 2022, 01:56:45 AM »
Hi,thanks for your early reply. No its not a dipper, its a small bent copper pipe and it is lose ,so I need to know the correct position,
6
Engines / Lister model L
« on: March 15, 2022, 05:26:32 AM »
Hi all, I am restoring an old model L 5 hp engine. What is the correct position of the oil pipe extending from the bottom of conrod?
Thanks for any help.
Regards
Thanks for any help.
Regards
7
Original Lister Cs Engines / Re: CS fuel pump assembe
« on: October 27, 2020, 03:41:29 AM »
Hi Jim
That is a great help,thanks
Kent
That is a great help,thanks
Kent
8
Original Lister Cs Engines / CS fuel pump assembe
« on: October 26, 2020, 12:34:11 AM »
Hi All
I am in my final stages with my CS 3,5 ,but having some trouble with the assemble of the fuel pump ,didn't take to much notes of how it all comes together. Particular the fuel rack alignment ,would appreciate some photos if possible.
I am in my final stages with my CS 3,5 ,but having some trouble with the assemble of the fuel pump ,didn't take to much notes of how it all comes together. Particular the fuel rack alignment ,would appreciate some photos if possible.
9
Original Lister Cs Engines / Re: Lister CS 3.5
« on: October 19, 2020, 05:00:22 AM »
Thanks 38ac,I was on the same lines.
10
Original Lister Cs Engines / Lister CS 3.5
« on: October 09, 2020, 06:04:54 AM »
Hello Members
What is the correct ring gap for new parts ,Rings and liner.
thanks.
What is the correct ring gap for new parts ,Rings and liner.
thanks.
11
Engines / Complete overhaul of CS 3.5 hp
« on: March 03, 2020, 08:22:33 AM »
Hi I am new in this forum, What is the correct method to remove the flywheels , the cylinder liner is worn and needs replacing, do I just press it out as per normal, what's to look out for? The liner looks to be stainless inside and cast iron outside? How to proceed? Thanks for any ideas. Cheers
Pages: [1]