Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mixedangased

Pages: [1] 2
1
Generators / 8/1 somac
« on: April 29, 2012, 06:41:07 PM »
selling my 8/1 somac on the bay Item number: 160789897067
if anyones intersted

2
Lister Based Generators / Re: lister startomatic
« on: March 15, 2012, 06:29:15 PM »
thanks listeroil,
that makes sence now,so the spare wire out of the alt that ithought was batt charging goes to both reisters in the top box then ? a bit for charging and a bit to exite the shunt field winding is that correct? as only got 5 wires out the alt

chris

3
for that sort of money you can have my 8/1 somac which is running  :o ( alt needs sorting tho)

4
Lister Based Generators / Re: lister startomatic
« on: March 09, 2012, 05:11:46 PM »
hi yes the only wiring diagram i have is one i found on this site,
the way is wired is a thick blue wire off the rear slip ring through the transformer then out to a insulated connection post,then two thin green wires from transformer to
the rectifier and then 2 wires black and red out of the rectifer to two red wires marked x and xx into the windings,
will try and find the wiring dia again but not really sure its the correct one .mines a bkb 4.5kva 1500 rpm 240v single phase

5
Lister Based Generators / Re: lister startomatic
« on: March 09, 2012, 07:12:02 AM »
i thought it was ac off slip rings to transformer reduced to the rectifier which changes to dc output for the field
windings,if i put 24vdc into x/xx wires on termanial block i get a higher ac voltage out of the unit and the slip ring voltage is the same as output approx 165 v ac.
normally the voltage on slip rings is about 30 v ac so now im really confused???? ??? also i have a wire in the top box that i dont know where it goes which is producing about18v dc ?

regards chris

6
Lister Based Generators / lister startomatic
« on: March 08, 2012, 08:00:51 PM »
hi, anyone know what the ac voltage should be at the slip rings and the dc output of the transiformer to the rectifier ?
on a bkb alternator i think mines kaput

ta chris

7
Lister Based Generators / Re: Weight of CS8/1 4.5KVA startomatic set
« on: February 21, 2012, 06:46:49 PM »
think your are looking at a ton or there abouts or 1000 kg roughly

8
Lister Based Generators / somac
« on: February 06, 2012, 06:30:15 PM »
hi
 anyone got a wiring diagram for a bkb 4.5kva altenator or any info on how to test one,ie meter reading values?

9
Lister Market Place (things for Sale) / Re: lister lr1 somac parts
« on: February 01, 2012, 07:11:59 AM »
located in stroud glos,will take some pics,wheres your pickup point?

10
Lister Market Place (things for Sale) / lister lr1 somac parts
« on: January 31, 2012, 07:03:51 PM »
lr1 somac set in bits parts missing from eng and alt,not seized and has good compression,£50
will get that for scrap,shame though as usefull for someone

11
Generators / lister somac help
« on: January 22, 2012, 04:17:12 PM »
any one running a somac set with a 4.5 kva bkb electronics alt ?,as need a wiring diagram ,alt top box and wall panel,
or pic would help alot,do they use the usual startomatic boxes ?
any help please

12
Things I want to Buy / Re: parts wanted cs 8/1 uk
« on: January 20, 2012, 04:27:53 PM »
ok sorted now ,thanks for everyones help.

13
Things I want to Buy / Re: parts wanted cs 8/1 uk
« on: January 19, 2012, 06:08:14 PM »
ok ta wil give them a try.unless someone on here has a s/h one

14
Things I want to Buy / Re: parts wanted cs 8/1 uk
« on: January 19, 2012, 07:27:21 AM »
yes and thanks,they only sell the complete rocker set at £60,trying to sort a s/h one but might have to
bite the bullet and buy from them if no joy anywhere else.also will indian parts fit a genuine engine?
ta chris

15
Original Lister Cs Engines / Re: Finding the year of a Lister
« on: January 15, 2012, 07:22:30 PM »
ok,
thanks everyone

Pages: [1] 2