Lister Engine Forum
How to / DIY => Generators => Topic started by: snowman18 on May 14, 2020, 12:44:19 AM
-
This is the generator that i picked up in Ontario, first time use the voltage meter on the control panel shows 250 volts.
I'm stumped why there's no power beyond the voltage meter, the breaker checked out.
(https://i.postimg.cc/B66NQn7y/Stamford.png)
-
What I needed to know was in the Basler AVR doc.
https://www.genpowerusa.com/content/files/MANUAL-BASLER-AVR-VR63-4B.pdf (https://www.genpowerusa.com/content/files/MANUAL-BASLER-AVR-VR63-4B.pdf)
(https://i.postimg.cc/Yq2kBhg7/PJ-s-Besler-Regulator.jpg)