Lister Engine Forum
Lister Engines => Petteroids => Topic started by: londonron on May 05, 2020, 10:54:36 AM
-
I have a PJ4WM i just got and its leaking water into the oil. Any ideas on which way to tackle this? As its got individual heads and it starts well be a shame to disturb lots of things that are ok.
-
Assuming you do not have an oil to water intercooler, the most likely culprit will either be head gasket or liner 'O' ring failure.
-
Have removed water pump from the list of possibilities. Water injector sleeve may be culprit so going to check them . Then we will have to bite the bullet and take off the heads.