Lister Engine Forum
Lister Engines => Listeroid Engines => Topic started by: Welding on April 26, 2020, 08:33:36 PM
-
Hi all, I've had a few Lister d engines however this one has me struggling, it starts intermittent and usually only runs with butterfly closed, also cuts out if I move the needle clockwise , any help welcomed thanks
-
I guess moving the needle clockwise is closing it - leaner?
And if "closing the butterfly" is the same as "choke" - then that is effectively richening it up, too
Which suggests it's starving? Are all the orifices clean? That would be my first check, fwiw