Lister Engine Forum
Lister Engines => Listeroid Engines => Topic started by: Hes on April 08, 2020, 12:38:53 AM
-
Evening gents, - first post - basically overhauling an SR1A for a rob roy dumper I have bought.
Its been stood full of water for the last year so iv decided to rebuild it. I have never worked on a lister before, so a few questions to come from me - I hope you guys can help out.
Hopefully iv attached a few pics to this message...
Cheers, Hes.
-
attachment attempt #1 unsuccessful :-\ try again tomorrow
Hes
-
Hi Hes
Attachments max wide 900px, you have to resize pics.
BR
VP
-
.
-
.
-
Hi Hes
Very good. Now try again and tilt the pics and reduce wide px. After that hands on job!
Stay safe
VP
-
Hi Hes
Very good. Now try again and tilt the pics and reduce wide px. After that hands on job!
Stay safe
VP
Getting there, Thanks for the tip!
-
.
-
These should be right... (can anyone can delete the previous pictures on this thread?)
-
Still the wrong way! but they are the correct way on my PC
-
Can anyone shed some light on part numbers for this engine? My parts I want to order all start with 201 but im finding when I search for them online they start with 570.
I.E.
My piston: 201-50851/OS 020/19 (assume thats 020 oversize) Internet piston: 570-10940/020
My Big end bearings: 201-50971 On the internet : 570-12170
Any help would be appreciated. Thanks
-
Hi Hes
first of all: strip every part, clean thoroughly every part (some pics wil help when reassembly), mesure main parts (bore, piston, rings, journals, babits, bushes, etc).
After that - only - you will see IF you need some parts. Dont expect to have a Ferrari!
You seems to be hurried!
Be safe
VP
PS: tilt pics and resize pics, and tilt and cut.
-
Had a good clean of everything today. This engine was stood full of water for a long time and was seized tight.
Cylinder is pitted heavily, piston is scored, valves are like a sieve, push rods are bent, big end shells worn through, mains worn through.
All parts il have to renew, probably a few more yet aswell.
-
Hi Hes
It will take your wallet south!
Its to rebuild the dumper? Post a pic of the bore though.
Cheers
VP
-
I dont mind spending on it as long as its right. I wouldnt want to take it apart again.
Il get a pic of bore tomorrow if i remember.
thanks , Hes
-
Hi Hes
It will take your wallet south!
Its to rebuild the dumper? Post a pic of the bore though.
Cheers
VP
Sorry, yes for a dumper rebuild. Im restoring the whole thing, should be a pic attached...
-
Nice toy!