Lister Engine Forum

How to / DIY => Engines => Topic started by: John141 on October 22, 2019, 09:11:08 PM

Title: Lister SR1
Post by: John141 on October 22, 2019, 09:11:08 PM
Hi I'm building my sr1 up can someone tell me the tappet clearance ,and the bump clearance please.  Thanks  john.
Title: Re: Lister SR1
Post by: sirpedrosa on October 22, 2019, 11:59:29 PM
Hi John

If you find workshop manual send me a copy, please.

BR
VP
Title: Re: Lister SR1
Post by: cobbadog on October 23, 2019, 05:47:27 AM
For my manual I Googled SR2 workshop manual and one popped up for a free download. I suggest it would be worth a try for you to do the same.
Title: Re: Lister SR1
Post by: John141 on October 23, 2019, 10:43:31 PM
Hi thanks,  looks like all these engines have different settings I have a LD 1 book it says bump 030 to 033. And tappets 002 for both, that's not a lot?
Title: Re: Lister SR1
Post by: cobbadog on October 24, 2019, 11:31:45 AM
0.002" does sound a bit too close or was it 002mm ?
I dont know enough about the bump settings.