Lister Engine Forum
Lister Engines => Original Lister Cs Engines => Topic started by: Lister Rob on April 08, 2019, 08:33:23 PM
-
On the hub before the flywheel on both sides there a screw on top of the hub. Is this for oiling or just oiling on a rebuild. I change the oil regularly but was wondering if I have to add oil to this location and is there any other areas for oiling . I know you have to grease the cam and the bearings on the generator on both sides, Thanks.
-
That screw locates the crank bushings. It keeps them from moving. No need to oil there. Probably not a bad idea if it has been sitting for a long time but you can accomplish the same thing by pumping the oil pump primer handle.
-
thanks