Lister Engine Forum
Lister Engines => Listeroid Engines => Topic started by: SWE-Timo on October 15, 2018, 07:56:45 PM
-
Hi. My name Timo from Sweden I just bought a Snipa with a lister Morton which I know. I thing about . Meaning I’m a sailor and not a wooden boat owner with old engines
It’s a lister 1xylinder Hans started air cooled engine . How do I find out what model it is ?
Cheers
/Timo
-
Post a photo and the engine number on this site someone will be able to tell you what you have
-
here is the picture .
thanks for the help
-
The engine
-
It's a lister SR1 from I think 1968
-
HI and thank you for the immediate response ..
where can i find parts for the engine ?
cheers
-
You can get almost everything you need from the UK or America. You will need well stuffed pockets that are fairly deep. You will also need a manual
http://www.winget.co.uk/document/lister%20petter%20l%20series%20workshop%20manual.pdf
-
by " stuffed pockets" do you mean full of money , if so i dont have any £$€ because my sailing boat empties them ..
-
Parts aren't too expensive postage is unless you have a dealer in Sweden
-
If a boat is a hole in the water you have to fill with money, then a CS Lister is a lump of ferrous metal that'll not only cost you it's weight in gold, you'll buy the bits you can't repair with as much enthusiasm as you shell out for a new suite of berthing lines.
Ask me how I know...........
Cheers
Stef
-
I'll be back in the spring time with loads more questions .
Now its winter ( first snow today ) 6 more months to go before the project work starts .
This is the project .
550X190 Oak built in the 50's in Kalmar ( Sweden )
-
We keep good stocks for nearly ALL Lister engine models made in the past 50 years. SR models are commonplace and well supported.
gary@dieselgen.com
dieselgman