Lister Engine Forum

Lister Engines => Things I want to Buy => Topic started by: veggie on March 28, 2016, 04:24:45 PM

Title: Serpentine pulley source
Post by: veggie on March 28, 2016, 04:24:45 PM

Hi All,

Anyone know a source for 8 ribbed serpentine pulleys ?

I am looking for:
8 ribs
6.0" diameter
1" bore ( or taper lock bushing style )

This is to match up with the 8.34", 8 rib serpentine pulley on my ST-5 generator head

Thanks,
veggie

PS: I think it would cost me a small fortune to get one custom made locally

Title: Re: Serpentine pulley source
Post by: dieselgman on March 28, 2016, 05:26:35 PM

We are stocked on the micro-v pulleys. We keep them in K and L style with the SK QD bushings - taper lock quick disconnect.

I will have to check on 6" though... I think we jump from 5" to 7" in those.

EDIT: We have 3.5, 5.0, 7, 8, 9, 10, 11, 15 inch sizes - nothing in 6" at the present time. No one has requested that size. That could be ordered in though.

dieselgman

Title: Re: Serpentine pulley source
Post by: 2ringers6 on March 28, 2016, 08:07:13 PM

Gary,  do you sell the belts as well?   Or do you have a recommendation on where to get them?

Title: Re: Serpentine pulley source
Post by: dieselgman on March 28, 2016, 08:32:43 PM

We also stock the belts in 105 inch and 120 inch lengths (about right for a typical 24" flywheel and ST generator head) - both K and L section. For K8 I believe some automotive/truck serpentine belts are a good choice but I do not have a vendor or part number at the present time.

dieselgman

Title: Re: Serpentine pulley source
Post by: Maxjasper on January 13, 2019, 01:00:27 AM

What is the source name or contact info for the pulleys?

Title: Re: Serpentine pulley source
Post by: vdubnut62 on January 13, 2019, 09:20:22 PM

Just PM dieselgman here on the forum. Gary will take care of you.
At least it worked for me.
Ron