Lister Engine Forum

Lister Engines => Things I want to Buy => Topic started by: Zagato on June 24, 2010, 03:12:49 PM

Title: Lister CS 5-1 wanted
Post by: Zagato on June 24, 2010, 03:12:49 PM

Lister CS 5-1 wanted in good runnig order.  Also looking for a saw bench.  Thank you

Chris

Located Surrey England, willing to travel 6 hour round trip for right engine.  Thats 45 minutes driving and lots of tea stops !!

Title: Re: Lister CS 5-1 wanted
Post by: Combustor on June 25, 2010, 01:41:38 PM

Hello Zagato,
                 Any particular reason for a 5/1 ?  There were a lot less of them made with a 5/1 label, but I understand a 6/1 is the same machine running just a few rpm
faster. Not a problem to adjust the governor, and anyway the extra power could be handy. Even a good 8/1 is easily slowed down to de-rate it. Good luck with your search,
                                                                                                                                                                  Regards,  Combustor.

Title: Re: Lister CS 5-1 wanted
Post by: Zagato on June 25, 2010, 05:01:58 PM

Thanks for that Combuster, I will widen my search.

Chris