Lister Engine Forum

Lister Engines => Things I want to Buy => Topic started by: BobG on April 20, 2010, 10:55:03 PM

Title: Wanted, Fuel pipe for AD1
Post by: BobG on April 20, 2010, 10:55:03 PM
I need a new fuel pipe for my 7.1Kw 3000rpm AD1 genset. Are they available new?

(http://photos.imageevent.com/imagedude/atticsale/websize/IMG_1809.JPG)
Title: Re: Wanted, Fuel pipe for AD1
Post by: mike90045 on April 20, 2010, 11:41:10 PM
well, I'm slow, but whats 3000 RPM ? How do you get a belt to stick at that speed?   
Title: Re: Wanted, Fuel pipe for AD1
Post by: BobG on April 21, 2010, 08:38:24 PM
1) engine revs at max power
2) there is no belt, it's direct drive
Title: Re: Wanted, Fuel pipe for AD1
Post by: Combustor on April 22, 2010, 02:08:20 PM
Hello BobG
              If that is the high pressure line from pump to injector, any good fuel injection shop can make one from stock components, as the fittings are standard metric sizes.
      Be sure the new one is firmly clamped against vibration, as that is what usually kills them.  Regards,  Combustor.