Puppeteer

Author Topic: dk with the shakes  (Read 471 times)

BruceM

  • Hero Member
  • *****
  • Posts: 2751
    • View Profile
Re: dk with the shakes
« Reply #15 on: July 11, 2019, 02:55:08 AM »
+1  since it became a "hopper" with the new piston, it is heavier than the original, and additional counterbalance on the flywheels is needed.  Easy fix, and well worth the effort as it reduces stress on engine.  On the CS, increments of 4oz via Sculpy plastic clay inside each rim are a nice way to experiment, or stick on wheel weights.  If once you start to get just a little fore/aft movement with no hopping you're done, and can permanently epoxy in some lead.