Puppeteer

Author Topic: Pulley for alternator  (Read 507 times)

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Pulley for alternator
« on: June 17, 2019, 05:02:46 AM »
I'm after a B section, 2 groove pulley in cast iron or steel.
The PCD is 7 inches, or overall diameter about 7 1/2 inches.

Please call 0403 221 884, or message here.
I'm in Australia.

Thanks,
Jordan
« Last Edit: June 17, 2019, 05:13:55 AM by Jordan »

ajaffa1

  • Hero Member
  • *****
  • Posts: 1361
    • View Profile
Re: Pulley for alternator
« Reply #1 on: June 17, 2019, 11:51:46 AM »
Hi Jordan, try Power Transmission Parts in Sydney, here is a link to their website: https://www.ptparts.com.au/

Bob

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Re: Pulley for alternator
« Reply #2 on: June 17, 2019, 02:56:00 PM »
Thanks Bob,
I saw that, and would be up for $100 for the pulley, Taper-Loc bush & postage.
I may have to buy it next week, if nothing comes up cheaper.

Looking at my box of miscellaneous pulleys, I must be rich!

Jordan

ajaffa1

  • Hero Member
  • *****
  • Posts: 1361
    • View Profile
Re: Pulley for alternator
« Reply #3 on: June 18, 2019, 12:41:05 AM »
Hi Jordan, I`m pretty sure they do free postage on orders over $50.

Bob

glort

  • Hero Member
  • *****
  • Posts: 2977
    • View Profile
Re: Pulley for alternator
« Reply #4 on: June 18, 2019, 08:41:32 AM »

They are a lot cheaper than a lot of other places I have seen. I was stoked when Bob put me onto that place.
If you can find a cheaper place, Please let me know.

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Re: Pulley for alternator
« Reply #5 on: June 20, 2019, 12:53:56 PM »
These might be a little less expensive:

https://www.ebay.com.au/itm/SPB-B-section-V-Belt-Pulley-w-taper-lock-suit-Any-standard-Bore-size-1-2-groove/233027040831?hash=item36417e763f:m:mnaeeHAqBLKIJ72A7jzd2wg

Price includes Taper-Loc bush, and delivery cost is stated.

I'll likely get one of these, but have feelers out for a used one.
I better go look for a four leaf clover.

old seagull man

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Pulley for alternator
« Reply #6 on: June 20, 2019, 03:01:47 PM »
Depending on were you are in OZ.
I picked this up[ last year from a large bearing supplier in Brisbane, for about $60  145mm

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Re: Pulley for alternator
« Reply #7 on: June 20, 2019, 10:31:58 PM »
Thanks, I just assumed bearing suppliers would be the highest priced option.
It looks like they are about the same, so I'll check.

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Re: Pulley for alternator
« Reply #8 on: July 01, 2019, 01:37:23 AM »

ajaffa1

  • Hero Member
  • *****
  • Posts: 1361
    • View Profile
Re: Pulley for alternator
« Reply #9 on: July 01, 2019, 09:27:47 AM »
Very nice Jordan, looking forward to seeing the finished product.

Bob

Jordan

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Re: Pulley for alternator
« Reply #10 on: July 03, 2019, 12:37:59 AM »
I'll keep you all posted Bob, though I'm proceeding at a glacial pace.

Jordan