Lister Engines > Lister Based Generators
Re: Brush AC Generator
Phil:
Hi I have recently acquired a Lister - Brush Genset and am looking for the connection diagram.
It is a 22JA6A20 coupled to a Brush 100KVA Generator in great condition.
Connection Diagram E9840071
Frame No SOA 725
Mc No 2/74508 3
There is no AVR, just two wires coming out of exciter field with an ohms reading of 2.1
I am a farmer with limited electrical knowhow but believe some kind of AVR is needed. Just not sure which one!
By the way engine runs like a dream.
Brush Electric Company have been unable to help but if someone has the diagram or some advice it would be much appreciated
Regards Phil
NW. NSW Australia
ajaffa1:
Hi Phil and welcome to the forum. The only guy I Know who might be able to the answer to your questions is called Lucien Nunes, He lives in the UK and can be found on the UK stationary engine forum.
Bob
Phil:
Ok thanks for that Bob. I will try to reach him
Phil
oldgoat:
powersystems.com.au have a big range of regulators they may be able to help you not cheap but they know their stuff.
crusher:
--- Quote from: Phil on September 07, 2018, 09:37:53 PM ---Hi I have recently acquired a Lister - Brush Genset and am looking for the connection diagram.
It is a 22JA6A20 coupled to a Brush 100KVA Generator in great condition.
--- Quote from: Phil on September 10, 2018, 12:31:53 PM ---Ok thanks for that Bob. I will try to reach him
Phil
--- End quote ---
[move][/move]Diagram E9840071
Frame No SOA 725
Mc No 2/74508 3
There is no AVR, just two wires coming out of exciter field with an ohms reading of 2.1
I am a farmer with limited electrical knowhow but believe some kind of AVR is needed. Just not sure which one!
By the way engine runs like a dream.
Brush Electric Company have been unable to help but if someone has the diagram or some advice it would be much appreciated
Regards Phil
NW. NSW Australia
--- End quote ---
Navigation
[0] Message Index
[#] Next page
Go to full version