Author Topic: New member  (Read 21825 times)

dieselspanner

  • Hero Member
  • *****
  • Posts: 726
    • View Profile
Re: New member
« Reply #60 on: August 04, 2018, 07:01:11 PM »
Go to the 'Home' page for the site and it's at the top. WOK = 'Wall of Knowledge'

There's all sorts of interesting stuff and as mentioned the build thread by 38AC contains most of everything you need to know, and the twins are not that much different to the singles.

Don't hit anything with a hammer, once you're past the strip down stage, anyway, and you'll be fine!

Cheers
Stef
Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: New member
« Reply #61 on: August 06, 2018, 04:32:28 PM »
Thank you all kindly.

I opened the new thread here: http://listerengine.com/smf/index.php?topic=8320.0
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).