Puppeteer

Author Topic: petter ph1 problem starting  (Read 703 times)

startinghandle

  • Newbie
  • *
  • Posts: 8
    • View Profile
petter ph1 problem starting
« on: April 21, 2018, 09:20:25 PM »
I have a robroy sawbench pwered  by a petter ph1 and it is difficult starting cold .... when  I try starting it there is no exhaust smoke and I have to have a few attempts at moving the stop lever before it will start but when it  actually decides to go it starts with just a few swings
does something wear in the stop mechanism ?  thanks in advance

buickanddeere

  • Hero Member
  • *****
  • Posts: 803
    • View Profile
Re: petter ph1 problem starting
« Reply #1 on: April 22, 2018, 06:27:53 AM »
  The fuel rack has to has to move enough to make the pump element pump to the injector , or no fuel and no fire. 

startinghandle

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: petter ph1 problem starting
« Reply #2 on: April 23, 2018, 01:01:40 AM »
thanks for reply...I will check it