Puppeteer

Author Topic: flywheel rpm  (Read 530 times)

rosebud

  • Newbie
  • *
  • Posts: 15
    • View Profile
flywheel rpm
« on: January 06, 2018, 09:45:07 PM »
Hi all...

This has been discussed, but more advice is always helpful...

I have a 6/1 Listeroid with a 23.25" OD, set of flywheels.

I had a problem with aluminum wiring in a 3kw st gen.. which is now back on line.
Picked up a 3600 rpm gen head from a friend on the forum.. as a back up. This gen seem happy making 110 volts with the 6/1 at 670 rpms.

My question... Does anyone operate their 6/1 in this rpm range?

regards, and thanks

steve
Listeroid 6/1
SL1...4.25hp
ST 3kw
1.6kw PV

dieselgman

  • Hero Member
  • *****
  • Posts: 3141
    • View Profile
    • Lister Parts
Re: flywheel rpm
« Reply #1 on: January 06, 2018, 10:11:44 PM »
670 rpm for the 6/1 is very close to original specification... no worries.

dieselgman
Ford Powerstroke, Caterpillar 3304, Cummins M11, Too many Listers to count...