So as to be able to finish the restoration of a Lister FR1 engine, I am looking for a couple of parts as follows:
1), Side cover frame 291/2176/2 this item is made from sheetmetal and forms part of the cover for the injection pump and pushrods, and is in turn is what the injector pump inspection door forms a seal against.
2), Air filter assembly 291-2457/1C12 (or parts of) this item is common to both the FR1 and FR2 engines.
If anyone had a FR1 engine suitable for parts recovery (frosted, seized up, incomplete, etc) in the UK that would also be of interest to me, and I would take the whole lot. As I now run several FR1 engines, and parts are none too plentiful compared to the CS range.
Thanks in anticipation for any assistance you can offer.