Puppeteer

Author Topic: Lister CS 5-1 wanted  (Read 3395 times)

Zagato

  • Newbie
  • *
  • Posts: 39
    • View Profile
Lister CS 5-1 wanted
« on: June 24, 2010, 03:12:49 PM »
Lister CS 5-1 wanted in good runnig order.  Also looking for a saw bench.  Thank you

Chris

Located Surrey England, willing to travel 6 hour round trip for right engine.  Thats 45 minutes driving and lots of tea stops !!

Combustor

  • Combustor
  • Full Member
  • ***
  • Posts: 200
    • View Profile
Re: Lister CS 5-1 wanted
« Reply #1 on: June 25, 2010, 01:41:38 PM »
Hello Zagato,
                 Any particular reason for a 5/1 ?  There were a lot less of them made with a 5/1 label, but I understand a 6/1 is the same machine running just a few rpm
faster. Not a problem to adjust the governor, and anyway the extra power could be handy. Even a good 8/1 is easily slowed down to de-rate it. Good luck with your search,
                                                                                                                                                                  Regards,  Combustor.
Toys include- Lister CS 8/1, Lister VA SOM plant and some Aussie engines.
   "Old iron in the Outback" Kimberley, West Australia.

Zagato

  • Newbie
  • *
  • Posts: 39
    • View Profile
Re: Lister CS 5-1 wanted
« Reply #2 on: June 25, 2010, 05:01:58 PM »
Thanks for that Combuster, I will widen my search.

Chris