Puppeteer

Author Topic: Lister Cs big end shells  (Read 4161 times)

1958steveflying

  • Jr. Member
  • **
  • Posts: 97
    • View Profile
Lister Cs big end shells
« on: October 21, 2008, 09:31:49 PM »
Can anyone run through the fitment of new big end shells to the conrod and then conrod to crankshaft ? i have new shells, new shims, and new crank, reading the manual does not make total sense to me. Ie i'm not sure what the shims are used for (they are not mentioned) but assume its to aid fitting the shells to the conrod maybe !

 Thanks Steve

billswan

  • Sr. Member
  • ****
  • Posts: 439
    • View Profile
Re: Lister Cs big end shells
« Reply #1 on: October 22, 2008, 01:24:26 AM »
hello steve
Try reading this thread http://listerengine.com/smf/index.php?topic=3730.0
it's not exactly an original lister but it my help some.
16/1 Metro  in the harness choking on WMO ash!!

10/1 OMEGA failed that nasty WMO ash ate it

By the way what is your cylinder index?

1958steveflying

  • Jr. Member
  • **
  • Posts: 97
    • View Profile
Re: Lister Cs big end shells
« Reply #2 on: October 22, 2008, 10:18:38 AM »
Thanks for the link, it has cleared it all up for me and i can now get on with the task.

  Cheers Steve