Author Topic: glow plugs  (Read 2423 times)

wrightkiller

  • Hero Member
  • *****
  • Posts: 843
    • View Profile
glow plugs
« on: December 19, 2007, 10:39:56 PM »
Who here knows the part number for a glow plug that will fit a 6/1 bungplug for the head.....going to try my hand in making one .....some one said that it was a very common one .........   ;D ;D

lowspeedlife

  • old iron for a new age
  • Hero Member
  • *****
  • Posts: 726
  • no i'm not no cowboy
    • View Profile
Re: glow plugs
« Reply #1 on: December 20, 2007, 12:56:28 AM »
hey wright killer, found these people on the forum somewhere.
  http://www.stationaryengineparts.com/#1026X1028
price comes out to be right at 65 dollars u.s. (less tax & shipping i'm sure)
they also have a flywheel ring gear at about 75 dollars u.s. that i'm thinking about ordering if i can find the proper starter for it (10mm should be pretty common i think)
i would imagine they will sell you a glowplug only, if thats what you are looking for.
  good luck, scott r.
Scott R.

5.7 liter diesel k-5 blazer. converting to wvo.
omega 20/2 listeroid

Doug

  • Hero Member
  • *****
  • Posts: 3386
  • Why don't pictures ever work for me?
    • View Profile
    • Doug's Petteroid Stuff
Re: glow plugs
« Reply #2 on: December 20, 2007, 09:55:35 PM »
measure how deap the plug is.

I have a part number for a pair of Kubota plugs. One has along thread that look like it may be deap enough to reach right threw the

NKG Y706R

I measure about 1 inch of thread and 1/4 of sholder below, heater is another 5/8

This looks like if may be of uses
 
It's a Good Life, If You Don't Weaken