Author Topic: Petter Industrial Engine Data Sheets  (Read 20011 times)

guest23837

  • Guest
Re: Petter Industrial Engine Data Sheets
« Reply #15 on: August 25, 2018, 10:43:07 PM »
Make a donation to the internal fire museum and they will be happy to supply it via email

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #16 on: August 26, 2018, 12:38:31 AM »
Hi Jhondoh

Is there a chance somebody of this comunity to share it?

BR
VPedrosa
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #17 on: September 13, 2018, 09:46:00 PM »
Greetings my good fellows

I'm wondering again if there is a good soul, that can tell me the tightening torque of the nut (20) to the pump body.

Best regards to all
Pedrosa
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

EdDee

  • Hero Member
  • *****
  • Posts: 773
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #18 on: September 14, 2018, 08:22:35 AM »
Hi Pedrosa,

FWIW, I tend to under-tighten things on pipes and pumps, get the unit operating, then nip them up a little at a time until leaks stop...

Regds
Ed
12/1 750RPM/9HP Roid 5kVA- WMO Disposal/Electricity & Hot Water Gen
12/1 650RPM/8HP Roid 4.5kVa - Demon Dino
Chinese Yanmar - Silent Runner with AutoStart
Classic Komatsu 1963 Dozer/Fergusson 35 Gold Belly ...
Bikes,Cars,Gunsmithing & Paintball...Oh yes, a 5Ha open air Workshop to play in!

dieselspanner

  • Hero Member
  • *****
  • Posts: 726
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #19 on: September 14, 2018, 08:36:47 AM »
+1 for Ed, once you've got a feel for the joint concerned and it won't stop leaking strip it down and rebuild with a hydraulic sealant, Loctite 542 or similar.

Remember spanners are made to a certain length, proportional to their size, this is to help prevent over enthusiastic tightening!

Combination spanners allow the wise engineer (and evil bastards, such as my self) the luxury of clipping two together to double the force in times of dire emergency............

Cheers
Stef
Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #20 on: September 14, 2018, 09:31:26 AM »
Thanks both

By now I'm just a tire kicker. I mean there will be with all certainty, the right amount of torque, to tighten  this (and all) nut.

I do not want to break any pieces. and I believe that the correct torque is provided by the manufacturer, taking into account the working temperature and expansion.

Can someone give me the scientific value.

BR
Pedrosa
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

guest23837

  • Guest
Re: Petter Industrial Engine Data Sheets
« Reply #21 on: September 14, 2018, 10:58:55 PM »
Jim Perkins from the UK is an expert in all things Petter and a gentleman as well I have bought parts from him in the past and I read his book on Petter engines.

http://www.petterengines.co.uk/

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #22 on: September 15, 2018, 12:40:03 AM »
I'd email twice. So far no response.

Anyone has got the Bryce FAOAB manufaturer manual??

BR
Pedrosa
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #23 on: May 23, 2019, 10:40:32 PM »
Hi Everyone

Jus to say Jim Perkins is a fabulous fellow. I'll send him a vineyard souvenir...

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter Industrial Engine Data Sheets
« Reply #24 on: June 18, 2019, 01:17:55 PM »
Hi Everyone

Does anyone have the lister D workshop manual in pdf, please.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).