Author Topic: Lister genset for someone in Northern Ontario (Read 3203 times)

unimogr · « **on:** September 17, 2006, 04:15:40 AM »

If I was closer to the Soo I'd grab it, but I'm not so maybe someone else closer can snap it up.

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=260031698513

Jason

Joe · « **Reply #1 on:** September 17, 2006, 01:13:36 PM »

Actually that is just over the border from Mackinaw Michigan...nice trip this time of year...

Joe

rcavictim · « **Reply #2 on:** September 17, 2006, 05:42:05 PM »

If you notice the auction photo of the nameplate the engine is 3.5 hp @ 1800 RPM. That means the plant cannot make more than about 1800 watts continuous. No way it can be a 3 kW genset based on the nameplate horsepower. The seller answered some questions I sent. The whole thing apparently weighs only 200-300 lbs. This is a really small machine and $1K is a lot of dough for what is obviously a well used machine. I think I`d be better off spending that kind of money on a new 10 HP+ Changfa engine and new 5+ kW ST head.

buickanddeere · « **Reply #3 on:** October 25, 2006, 04:17:04 PM »

2.3KW max and that would be with a tail wind with 3.5HP. About 19 amp at 120V.

News:

Author Topic: Lister genset for someone in Northern Ontario (Read 3203 times)

unimogr

Lister genset for someone in Northern Ontario

Joe

Re: Lister genset for someone in Northern Ontario

rcavictim

Re: Lister genset for someone in Northern Ontario

buickanddeere

Re: Lister genset for someone in Northern Ontario