1
Petteroids / Re: PETTER PH2 engine - oil not reaching the tappets
« on: September 06, 2018, 10:09:12 AM »
Hi Bob
I managed to strip the banjo bolt on another PETTER engine and got the correct orientation of the spring and the piston. The spring is on the input side, followed by the piston. I would also have guessed it to be the other way around, but everything is functioning okay now. I didn't find signs of any ballbearing or sealing device in the other one as well, but hopefully they aren't floating around in the system somewhere.
Thanks for your help!
Builderbob
I managed to strip the banjo bolt on another PETTER engine and got the correct orientation of the spring and the piston. The spring is on the input side, followed by the piston. I would also have guessed it to be the other way around, but everything is functioning okay now. I didn't find signs of any ballbearing or sealing device in the other one as well, but hopefully they aren't floating around in the system somewhere.
Thanks for your help!
Builderbob