1
Engines / Re: LPW3 Genset
« on: December 22, 2017, 09:22:50 PM »
Single pre-heat unit in intake
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Engines / Re: LPW3 Genset
« on: December 15, 2017, 11:26:02 PM »
So I loaded up the genset and took it home..
Didn't start still
Gave it a shot one day of WD40 and it fired right up
Problem solved..... WRONG
It just happened to be warm for a few days
So I took the heat gun to unit and it fired up yesterday
So how do I test Glow plug circuit? I think there is a jumper wire on relay that wasn't there originally
does this unit only have one glow plug in intake?
not really sure of age or hours on this unit
It is a HawkPower 3 cylinder Genset maybe 10kw?
Thanks for the addition to group
Didn't start still
Gave it a shot one day of WD40 and it fired right up
Problem solved..... WRONG
It just happened to be warm for a few days
So I took the heat gun to unit and it fired up yesterday
So how do I test Glow plug circuit? I think there is a jumper wire on relay that wasn't there originally
does this unit only have one glow plug in intake?
not really sure of age or hours on this unit
It is a HawkPower 3 cylinder Genset maybe 10kw?
Thanks for the addition to group
3
Engines / LPW3 Genset
« on: November 01, 2017, 12:25:07 PM »
Help!!
So I bought this unit ant it ran fine.
put on trailer and moved it up a mountain and it wont start.
Fuel filter changed and bled for air.
Oil and fuel present
spins over like it should but it will not fire.
fuel shutoff solenoid works as it should
Thanks
So I bought this unit ant it ran fine.
put on trailer and moved it up a mountain and it wont start.
Fuel filter changed and bled for air.
Oil and fuel present
spins over like it should but it will not fire.
fuel shutoff solenoid works as it should
Thanks
Pages: [1]