1
Petteroids / Re: Kissan 12 - 1
« on: January 19, 2009, 02:19:34 AM »
Yes it would help me out to see some oil pressing set ups. I got a lot of machinery in 06, including an oil press that I also haven't gotten around to dealing with - it's still in the crate.
the only machines I dealt with right away were one of two 3 kw st heads, which I coupled with a kubota 7 hp 1800 rpm. the generator works great, but I did have to take the st head apart because, in the first minute of operation, bolts and nuts from the dog house loosened up and fell into the housing with the windings. (I found extra loose niuts and washers inside when I took it apart, left in there from the factory). after i took out the extra metal, I have had no problems with it.
It takes me awhile to get to my projects, but with enough time I can usually find some shade of success.
Daniel
the only machines I dealt with right away were one of two 3 kw st heads, which I coupled with a kubota 7 hp 1800 rpm. the generator works great, but I did have to take the st head apart because, in the first minute of operation, bolts and nuts from the dog house loosened up and fell into the housing with the windings. (I found extra loose niuts and washers inside when I took it apart, left in there from the factory). after i took out the extra metal, I have had no problems with it.
It takes me awhile to get to my projects, but with enough time I can usually find some shade of success.
Daniel