Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - xyzer

Pages: [1] 2 3 ... 64
1
Things I want to Buy / Re: Want large ST gen head. Pacific Northwest
« on: October 10, 2022, 03:35:57 PM »
Been thinking it over and it might not work out in the long run. I have many generators sitting around already. Mobile Bob was right on the governor! Part of my dream was charging Teslas with dead batteries. Getting rid if the non detergent oil is a dirty job!

2
Things I want to Buy / Re: Want large ST gen head. Pacific Northwest
« on: October 08, 2022, 02:23:46 AM »
38ac,
You never know? I am trying to keep freight out of it but that might not be possible. I am restoring a 1951 ford flathead that came off my dad's sawmill. So far it has nothing to do!

3
Things I want to Buy / Want large ST gen head. Pacific Northwest
« on: October 06, 2022, 04:14:18 AM »
Looking for larger Generator head 15K or larger. Live in Bend Oregon.
Thanks
Dave

4
General Discussion / Re: listerengine.com forum
« on: August 01, 2021, 02:39:09 PM »
Yes! Thanks!

5
Listeroid Engines / Re: Simple Electric Starter for Listeroids
« on: November 15, 2020, 03:23:05 PM »
12 volt, rubber drive wheel. Another way.
https://youtu.be/_QmWXNo-Gmg
Sorry! Won't copy link?

6
Listeroid Engines / Re: What are you guys using for fuel tanks?
« on: March 18, 2020, 03:49:32 AM »
Portable air tanks work nice with filler welded it.

7
Listeroid Engines / Re: Where is 38c's flywheel balancing thread?
« on: February 20, 2020, 11:06:02 PM »
It all makes sense to me now. Wondered for some time what happened. What I figured.

8
Listeroid Engines / Re: DIY Short block
« on: January 08, 2020, 11:39:33 PM »
Not that I would …….I would buy 3/4" anyway aluminum plate waterjet finished sections, CNC mill each section, machine fastenings, dowel pin, mounting holes, TRB races, with O-ring groves and bolt it up! No boring mill needed anyway. Welding would work on anything but involves another line of work and attack.... in theory you could get waterjet parts within +/-.010, and finish it on a Bridgeport.

9
General Discussion / Re: Happy new year
« on: December 31, 2019, 10:31:49 PM »
Happy New Year all!

10
General Discussion / Re: Forum layout change?
« on: December 16, 2019, 03:20:47 AM »
Figured it out! Like I said it must be my end. The little up down button upper right hides all the stuff I use!

11
General Discussion / Re: Forum layout change?
« on: December 15, 2019, 03:49:29 PM »
Interesting! At least I now know it is me! When I log in it doesn't show I am logged in or any of the link buttons. I must have some goobers on my end!

12
General Discussion / Forum layout change?
« on: December 14, 2019, 06:49:02 PM »
It appears on my end there is no "topics posted sense last visit" button anymore. Is it my end? Makes it hard to keep up on goings on!
Dave

13
General Discussion / Re: California power outages......anyone running on Lister-roid power?
« on: October 13, 2019, 05:46:19 AM »
My dad ran his 6/1 to keep the freezer inline! He is 93. I bought 2 from George many years ago. He put electric start on his. I think that may be a good idea as years move on.

14
Changfa Engines / Re: New Watercooled Diesel Toys
« on: June 30, 2019, 07:19:55 PM »
Glort, (sp chk!) Saw your find. 1st one I've seen aside from mine. I might have a earlier version but still same basic design.
https://youtu.be/cExllSx6iqU
Do a search here for Kubota by me.

15
General Discussion / Re: Motorcycle with Lister D engine.
« on: January 30, 2019, 08:16:08 PM »
Love it!

Pages: [1] 2 3 ... 64