Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - old seagull man

Pages: [1] 2 3 ... 7
1
Lister Based Generators / Re: Alternator Hz tip
« on: June 25, 2019, 09:01:41 AM »
Buy yourself one of these and connect in to the generator output.
The 20Amp version has its own internal shunt so the power go's straight through it at all times and you have volts, Freq, watts, Kwh, amps, all for less than the cost of a few beers.
Got 4 of them on things. I know Glort collects them.

https://www.ebay.com.au/itm/AC-110-250V-100A-Digital-LCD-Panel-Meter-Monitor-Power-Energy-Ammeter-Voltmeter/323753388465?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

2
Things I want to Buy / Re: Pulley for alternator
« on: June 20, 2019, 03:01:47 PM »
Depending on were you are in OZ.
I picked this up[ last year from a large bearing supplier in Brisbane, for about $60  145mm

3
Changfa Engines / Re: New Watercooled Diesel Toys
« on: June 18, 2019, 07:11:46 AM »
Well done mate, we need pictures. By the way did you ever collect that other engine i put you on to, out west?
Good news on the panels, i have a whole lot if you want.
Our energy company just changed hands, and today they just installed our two new smart meters. Don't that suck.

4
Everything else / Re: ESD 5500E engine speed controller unit
« on: June 03, 2019, 01:01:21 PM »
Brilliant idea, looking on fleebay now.  :) ;D

5
Engines / Re: Head Bolt Torque - Changfa 175
« on: June 01, 2019, 12:59:08 PM »
Might help.

my zs 195 manual says head bolts to 25 kgf.m (kilogram force meter)
If my math is correct that's something like  180 foot pounds.

6
Everything else / Re: ESD 5500E engine speed controller unit
« on: June 01, 2019, 12:48:30 PM »
Thought the same thing, put one on dads holden statesman, years ago.
Most of the ones you can get these days have a vacuum operated servo, so no go.

7
Everything else / Re: ESD 5500E engine speed controller unit
« on: May 31, 2019, 11:56:39 AM »
Thanks Guys, the most expensive part of the setup is the actuator.
Bob i have see the units as cheap as 60-70 Dollars.
So you could almost afford a spare if you needed it to be bomb proof.

8
Everything else / Re: ESD 5500E engine speed controller unit
« on: May 31, 2019, 04:10:32 AM »
No Sorry mate, but this is not a bad price for the lot.

https://www.ebay.com.au/itm/ESD5500E-Engine-Speed-Controller-MSP6729-Magnetic-Speed-Sensor-ADC120-actuator/143230026989?_trksid=p2485497.m4902.l9144

Its exactly the same as the picture my mate sent. he works for a mining company, and it was in the stock to be cleaned up.
You you don't need a cheap 250kw 3 phase motor do you? make a good induction generator.

9
Everything else / ESD 5500E engine speed controller unit
« on: May 30, 2019, 02:57:46 PM »
Hi All;

I have been offered at a very good price an new old stock one of these units.

An was wondering if anyone had any experience with them?

What i was thinking is i could put the speed sensor on the output shaft of the gen head and control the engine speed with the unit and always have a 1500 rpm generator no matter the load.

11
Changfa Engines / Re: Do it Changfa Style
« on: May 20, 2019, 11:09:31 PM »
Thank you.

12
Changfa Engines / Re: Do it Changfa Style
« on: May 20, 2019, 01:55:36 PM »
Anybody got any info or pictures of the subframe and transmissions of these mechanical marvels?

13
Changfa Engines / Re: 1115 build
« on: April 29, 2019, 07:32:28 AM »
Have you the parts, instruction  manual that came with your engine there is an exploded view of the pump in it.
Thats how i did mine. if not im shore i have a pdf of the 1115 engine somewhere. just let me kn ow.  Ok.

14
Original Lister Cs Engines / Re: Utterpower CD
« on: April 25, 2019, 01:05:18 PM »
Thank you for the kind offer off the CD. But you have told me everything i need to know.
What Im wanting is to collect as much useful information, on the S195 type engines as i can.
Thinking of knocking up an information web site. As there are others out there, probably not a lot of them, who would be interested.

15
Original Lister Cs Engines / Re: Utterpower CD
« on: April 22, 2019, 12:54:11 PM »
Is the Utterpower CD worth chasing up, for info or has all the information filtered though to use in other ways.
My interest is the S195 china diesels.

Pages: [1] 2 3 ... 7