Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - chaldon3

Pages: [1] 2
1
Straight Vegetable Oil / Re: Buy Straight Oil - Best type an price?
« on: April 20, 2014, 07:56:32 PM »
thats a good thing  :D

2
Straight Vegetable Oil / Re: Buy Straight Oil - Best type an price?
« on: April 17, 2014, 09:59:21 PM »
ok so burning svo is cleaner, well i was not aware of that. thank you

3
Straight Vegetable Oil / Re: Buy Straight Oil - Best type an price?
« on: April 12, 2014, 08:56:38 PM »
please excuse my ignorance but why is veg oil preferred to red diesel in. uk its around the same price. red starts better. garry

4
Petteroids / Re: AC 1 oil pressure
« on: April 11, 2014, 03:43:15 PM »
fit your fit an oil gauge to your series 2 piece of mind. i have wired a stop start solenoind through my oil switch. as sone as pressure drops cuts power to solenoid engine fails safe

5
Listeroid Engines / Re: listroids
« on: April 05, 2014, 10:14:43 PM »
In fact, there are plenty of original Dursley Listers in certain parts of the world - namely the U.K. or some former British colonies. They produced over 500,000 of them in 50 + years of production. They are quite scarce in other parts of the world - especially North America. They are expensive wherever they are scarce. The Indian Listeroid is a low-cost entre that can be a quite acceptable stand-in for an original Lister - especially if they are checked over carefully and reworked wherever the Indians have done sloppy work. Take a look in the Lister Engine Gallery linked to this site - many projects there with many different types of Lister equipment as well as the clones.

dieselgman
many thanks dieselgman

6
Listeroid Engines / listroids
« on: April 05, 2014, 08:26:21 PM »
hi my question is listroids i am aware they are made in India. but thats all i can find. why would any one buy a copy when there are a good amount of lister engines avalible.
this is a genuine and constructive question. i have never seen or owned one and would like to know more about them if you have some pics that would be great thanks guys.
garry. proud owner of ac1, ac1 direct injection and ad1

7
Listeroid Engines / Re: anti-wear coatings
« on: March 30, 2014, 07:31:27 PM »
Yesterday at the California NASCAR race, I saw 9,000rpm on a tach :o; they must be highly stressing the valve train as well. Anyone use PTFE in their Roid oil? I use some in my rail 300MB diesel for many years.
overbore
i also have thought about a liquid additive for my lister. but read a review from a scientist and he said they do not do a lot. ptfe is Teflon now to get Teflon to adhere to a pan first a special primer is used then the ptfe is sprayed on and placed in to an oven at an extreme heat setting to get the ptfe/teflon to coat the metal. ps his words not mine. must admit if i thought i could spend 50 pound on an additive that worked i would buy it tomorror.

8
Lister Based Generators / Re: what oil
« on: March 27, 2014, 08:07:06 PM »
h,i thank you for taking the time to reply.
will give them a ring. garry

9
Lister Based Generators / Re: lister petter ac1/ad1
« on: March 26, 2014, 07:31:54 PM »
 :D hey you never know could have sent it all out the country. many thanks for taking the time to reply. garry

10
Lister Based Generators / what oil
« on: March 24, 2014, 10:01:19 PM »
hi guys what oil for lister petter ac1 series 2. i need to top up the original oil is a strong green colour if that helps. many thanks garry

11
Lister Based Generators / Re: lister petter ac1/ad1
« on: March 18, 2014, 10:08:37 PM »
hi guys i have been informed that the lister ac1 was designed to be used as a marine engine. the ad1 was not because it vibrates quite a bit
i still do not understand why. any ideas guys.

12
Lister Based Generators / lister petter ac1/ad1
« on: March 17, 2014, 07:49:19 PM »
hi i have 3, single cylinder lister engines i was going to use one for my boat.
ac1 series 1
ac1 series 2
ad1 direct injection
ok i chose the ad1 7.5 hp however when started it vibrates quite a lot. so i fitted the ac1 series 2 which is smooth and has only a small amount of vibration and just 1 hp less
my question is why the big difference in vibration. there seems to be very little difference on the out side. ??? ??? thanks in advance. garry.

13
Engines / Re: Nice old LD1
« on: November 29, 2013, 08:13:08 PM »
wow great engine i have 3 Lister petter, however would like a proper Lister like the ld1 one day.  ;D

14
General Discussion / fourth Thursday of november.
« on: November 27, 2013, 01:36:42 PM »
have a good thanks giving to the good people of USA. hope you enjoy. garry and family.

15
General Discussion / Re: newbie
« on: November 26, 2013, 05:50:25 PM »
hi guys great warm welcome. i do spend a lot of time in my garage but live in my house. internal fire museum is a wonderful place to visit.
when i was a very young lad i fished for a living and was dependent on my lister engine,now its a hobby and an admiration of these wonderful bullet proof engines.
for some of you guys these engines play a fundamental part in you and your family's lives . you have my full respect.
hope to chat in the near futre, i will fill out my profile. kind regards garry.

Pages: [1] 2