Lister Engine Forum
How to / DIY => Generators => Topic started by: rosebud on January 06, 2018, 09:45:07 PM
-
Hi all...
This has been discussed, but more advice is always helpful...
I have a 6/1 Listeroid with a 23.25" OD, set of flywheels.
I had a problem with aluminum wiring in a 3kw st gen.. which is now back on line.
Picked up a 3600 rpm gen head from a friend on the forum.. as a back up. This gen seem happy making 110 volts with the 6/1 at 670 rpms.
My question... Does anyone operate their 6/1 in this rpm range?
regards, and thanks
steve
-
670 rpm for the 6/1 is very close to original specification... no worries.
dieselgman