Lister Engine Forum
Slow Speed Diesel Engines => Other Slow Speed Diesels => Topic started by: jetmax on November 29, 2016, 09:40:50 AM
-
Hi all old iron lovers!
I have old SLAVIA diesel engine , I found them while waiting me in forgotten korners in plantages.
I have now 4diesel engine + 1 jap engine . Tree are working , jap not yet. They have heavy damage, and I try to rescue them back to life .
These engines similar like lister diesels, I learned from lister forum much things olso . But I dont have data base of slavia , in Czech Republic olso no more .
I hoppe some one could help to me :-\
For example what is big end bearing to journal clearence end main bearings.?
You can see olso my videos in youtube : just write ''mesut anilgan''
Sorry for my English .
Kindly regars
Mesut
-
I am very sorry that it was lock topic :(
-
https://m.youtube.com/results?q=mesutanilgan&sm=3
Here is my Slavia 12 hp D12 . Such a nice engine , after 50 year sitting there wonderful condition!
-
Hi Jetmax,
Those are lovely old iron ladies indeed!!
Looking at the basic design from your photos, I would be reasonably comfortable using "lister" specs for clearances and the likes as used on the Lister CS series... The materials of the components look to be very similar to the CS style engines, so you should be safe!!
If anybody has information to the contrary, please shout!!
Very nice!!
Cheers
Ed
-
Thank You very much for nice words Ed .
Since one year I am looking for any information , and I agree whit you .I think olso to use same measurements .
But still I belive there is Somewhere database , wish me luck because I need .
Did you see my wideos in youtube ?
Cheers
Mesut
-
Good Luck!!
I did see the utube vids too...
-
Hi Mesut
Nice stuff, and well done with the English, I lived in Germany for 4 years, Kazahkstan for 2 an d the last 5 in France, i can struggle through verbally, but without Google translate writing anything other than English is beyond me!
If you use the site search engine, from the home page, there's almost every thing you need to know, it really is a great encyclopedia of slow speed diesel knowledge, and the guys on the site are ok too!
I liked the Youtube posts too.
Cheers Stef
-
Very nice engines!! If you get bored you can always send one over to the States, I would be honored to take care of it. ;)
Welcome to the forum!!
I look forward to seeing more videos.
Ron.
-
Very nice engines!! If you get bored you can always send one over to the States, I would be honored to take care of it. ;)
Welcome to the forum!!
I look forward to seeing more videos.
Ron.
YE she is very nice , I have total 4 , I will put more, I am working on cylinder and crankshaft bearings ,
Tomorrow I will continue .
Sorry still I couldn't find to insert photos to my reply . Do you know how can I share my photos in reply ?
Cheers
Mesut
-
Sorry, I not good on pics either.
Ron.
-
https://youtu.be/wwftPCPPlF4
After repair cylinder , piston rings and connect ing rod change . Last condition.
I hopeyou like
Mesut
-
[youtube]https://youtu.be/wwftPCPPlF4[/youtube]
Last video after change connecting rod ,piston rings and repair cylinder whit jb weld. ;D
https://youtu.be/wwftPCPPlF4
Do you have any advice what kind of this metalik sound ?
Mesut
I found the problem , its coming from rocker arms shaft is sized , whenn I put grease no noise .
Cheers