Lister Engine Forum

Lister Engines => Original Lister Cs Engines => Topic started by: 1958steveflying on October 21, 2008, 09:31:49 PM

Title: Lister Cs big end shells
Post by: 1958steveflying on October 21, 2008, 09:31:49 PM
Can anyone run through the fitment of new big end shells to the conrod and then conrod to crankshaft ? i have new shells, new shims, and new crank, reading the manual does not make total sense to me. Ie i'm not sure what the shims are used for (they are not mentioned) but assume its to aid fitting the shells to the conrod maybe !

 Thanks Steve
Title: Re: Lister Cs big end shells
Post by: billswan on October 22, 2008, 01:24:26 AM
hello steve
Try reading this thread http://listerengine.com/smf/index.php?topic=3730.0
it's not exactly an original lister but it my help some.
Title: Re: Lister Cs big end shells
Post by: 1958steveflying on October 22, 2008, 10:18:38 AM
Thanks for the link, it has cleared it all up for me and i can now get on with the task.

  Cheers Steve