Lister Engine Forum

Lister Engines => Original Lister Cs Engines => Topic started by: 1958steveflying on October 15, 2008, 09:49:29 PM

Title: Cs 5/1 big end nuts
Post by: 1958steveflying on October 15, 2008, 09:49:29 PM
Hi All
   Is there a torque setting for the big end castle nuts.
  Thanks Steve
Title: Re: Cs 5/1 big end nuts
Post by: contaucreek on October 15, 2008, 10:29:39 PM
55 ft/lbs IIRC
Title: Re: Cs 5/1 big end nuts
Post by: 1958steveflying on October 15, 2008, 11:13:30 PM
Thanks, am i right in assumption that each nut is then tightened further for the split pin holes to align if they don't already.